Air Conditioner repair in DC, Air Conditioner repair in MD, Air Conditioner repair in VA, Appliances Repair in Alexandria, Appliances Repair in Arlington, Appliances Repair in DC, Appliances Repair in Fairfax County, Appliances Repair in MD, Appliances Repair in Prince Georges County, Appliances Repair in Springfield, Appliances Repair in VA, Refrigrator Repair in DC, Refrigrator Repair in Fairfax County, Refrigrator Repair in MD, Refrigrator Repair in VA
Refrigerators can be quite expensive, ranging in price from $500 to several thousand dollars. Before you buy your next fridge, give some though to the following considerations:
Since most new refrigerators must fit into the space vacated by your old refrigerator, be sure that you know the dimensions of your old refrigerator. You will generally want to get the largest refrigerator that fits the space you have available. You can measure the height, width and and depth of refrigerators with a tape measure. You can also lookup your current and prospective refrigerators in our database to see their measurements. This article contains further tips as following:
Shopping for a refrigerator can seem like a daunting task. Do you want, for example, a top-freezer, a bottom-freezer, a side-by-side, or a built-in? There are more choices than ever these days and with prices reaching up to a few thousand dollars for a single appliance, you certainly don’t want to find that the model you choose doesn’t fit into your space. Careful consideration of your kitchen, your family’s needs, and the measurements of your new fridge will help ensure that you don’t waste time or money having an appliance delivered that doesn’t fit.
Refrigerators need ventilation space to run efficiently. Because ventilation space varies from model to model, be sure to read the manufacturer’s suggestions; however, to maximize energy efficiency, it’s also a good idea to double the manufacturer’s recommended ventilation space.
Here’s how to measure:
Measure the height Be sure to measure from the very bottom of your space to the very top and add .5 – 1 inch just to be on the safe side. There should be enough room for the refrigerator to fit easily under any cabinetry that is mounted above and one the sides of the refrigerator, if needed.
Measure the width This is probably the most important part of the measurement. Make sure you leave enough room for the refrigerator to slide in and out of the space easily – at least 1 – 1.5 inches on each side. Also make sure you have enough space – at least 2 inches – to open and close the doors. Make sure there will be enough walking room around the fridge when the doors are open.
Measure the depth Some refrigerators are meant to be cabinet-depth and create a built-in, seamless look, while others are not. Measure the space from the wall (where the back of the refrigerator will be) to the edge of the nearest cabinet, if applicable, to determine which kind you will buy. Note that cabinet-depth refrigerators tend to be more expensive.
Measure your home’s outside entries and your kitchen entry Measure your outside entries to ensure there is a way your new refrigerator can get inside. First, take the measurements with the doors in place, and then, if you don’t find a fit, measure again with the doors off. One way or another, you are likely to have an enterance to the house that will work.
Measure the entries to your kitchen for the same reason.
Take your measurements twice to ensure their accuracy and write them down – don’t rely on your memory only! Lastly, when thinking about the size of your new refrigerator, consider your capacity needs. As a general guide: a family of two needs eight to ten cubic feet; add an extra cubic foot for each additional person using the fridge.
Freezer-on-top models: these are the most common (and often most affordable) models. About 50% of refrigerators sold in the United States are freezer-on-top models.
Freezer-on-bottom models: often preferred because commonly accessed food is at eye-level.
Side-by-side models: useful if you don’t have enough space for a wide-swinging door. However, some users have complained that the narrow size of the refrigerator itself doesn’t alway accomodate pizza boxes and large pots.
Cabinet-depth models: narrower in depth than standard models, but they approximate the appearance of the more expensive built-in models.
Built-in models: typically the most expensive models, these refrigerators come in fine finishes and can be customized to match your cabinets.
You want to consider the refrigerator’s finish — a stainless steel finish will give your refrigerator a “professional kitchen” look, which many people like. However, more basic colors are more common, with white the most common.
Manufacturers have added a number of special features to their refrigerators. Do you need any of these features?
Icemakers (internal or through-the-door)
Gallon-jug storage on the door
Stainless steel finish
Refrigerator Repair in DC
Don’t forget to check the warranty — a good warranty can protect your investment down the road.