Air Conditioner repair in DC, Air Conditioner repair in MD, Air Conditioner repair in VA, Appliances Repair in Alexandria, Appliances Repair in Arlington, Appliances Repair in DC, Appliances Repair in Fairfax County, Appliances Repair in MD, Appliances Repair in Prince Georges County, Appliances Repair in Springfield, Appliances Repair in VA, Heat Repair In DC, Heat Repair In MD, Heat Repair In VA, Refrigrator Repair in DC, Refrigrator Repair in Fairfax County, Refrigrator Repair in MD, Refrigrator Repair in VA
How To Clean a Furnace
Dirt is the biggest enemy of your furnace. It can waste fuel and drastically lower efficiency. Dirt affects all three basic components of your furnace, so cleaning is the most important part of regular maintenance. The three parts of the furnace should be cleaned: the filter system, the blower, and the motor.
The furnace filter should be replaced or cleaned at the beginning of the heating season and about once a month during periods of continuous use. To check the filter, take it out and hold it up to the light. If it looks clogged, replace it with a new filter of the same type and size regardless of the length of time it has been used.
Step 4: Clean blower assembly, belts and pulleys to blower, and motor housing. Cleaning blower is critical if furnace has a squirrel-cage fan, because openings in this type of blower often become clogged with dirt. To clean blower, remove panel that covers filter to gain access to blower or panel on front of furnace. This panel may be slip-fit on hooks or held by series of retaining screws. Access to inside of blower is usually gained by sliding out fan unit, which is held on track by screws.
If power cord to fan assembly is not long enough to permit fan unit to slide all the way out, disconnect cord. Mark wire connections first so you’ll be able to reassemble unit correctly. With toothbrush, clean each fan blade and spaces between blades.
Then, with vacuum cleaner hose, remove all dirt and debris loosened by brushing. Vacuum belts and pulleys. Wipe motor housing clean to prevent heat buildup in motor.
Sealed blower motors need to lubrication, but if yours has oil ports, learn how to service them on the next page.